residual oil fired boiler ton
The reason the gas residual fired boiler ton burner increased noise analysis when making use of the gas boiler and found this small fire normal, but this time turn the fire, extinguished or flashing instability. First speaking, that is because of this fire damper of the air volume setting is too large; i.e. after an oil fire because the micro-switch valve (damper outermost that group) inappropriate setting (set lower than the fire damper of the air flow larger) burner gas noise increases, mostly because the oil shut-off valve which is closed or lack of oil into the oil filter clogging; or, this is because of low temperature into the oil, the viscosity is too high or the pump into the oil temperature is too high; oil pump failure; fan motor bearing damage; there is because the fan impeller dirty equipment resulting in large noise. The above-described failure when using gas boiler, but also because the viscosity is too high oleaginous easy to be atomized (heavy oil); cyclones and because improper disc and the nozzle pitch; Note that because the fire is worn or dirty nipple; also because this preparatory tank the heating temperature is too high, causing the oil pump oil feed steam does not conform; or because the fuel inside the boiler resulting aqueous oil. When the above-described fault gas boiler used to perform this process, the test should be done gradually decreases; after heating temperature should be; adjusting the distance (between 0 ~ 10mm); clean or replace; is set to about 50 deg.] C to about; or drain oil change.
July 26, 2016, Beijing, China Everbright Paper Co., Ltd. and the company signed a "split 6 tons of steam condensing gas steam residual fired boiler ton contract" by the company responsible for the WNS6-1.25-YQ split condensing gas boiler steam to all production, installation and commissioning work. The product is the use of condensing technology, effective emission of harmful substances SOx, NOx, COx, is industrial boilers efficient and environmentally friendly solutions.
Henan residual fired boiler ton which measures to reduce soot integrity of the well-known and reliable Henan boiler manufacturers, provides a number of high-quality, durable oil-fired boiler according to market and customer needs, we know that the boiler combustion direct impact on the economic benefits of the unit, and the air quality of the environment . In order to improve the thermal efficiency of the boiler, reducing the amount of smoke and reduce dust, what measures can reduce dust Henan boiler there? First, to ensure adequate supply of air we know that the ratio of carbon dioxide is the carbon dioxide content of flue gas volume to the total volume of fuel in Henan boiler combustion under normal circumstances, the volume of carbon dioxide in the flue gas is constant, and the flue gas the total volume affected by the amount of air, no doubt increase in the amount of air is bound to the carbon dioxide content of the flue gas reduced accordingly, thereby reducing the soot, so to supply the appropriate amount of air. Second, the furnace temperature to maintain a certain temperature and excellent combustion temporal quality Henan boiler fuel is burnt, an important condition for soot, and the combustion of each boiler is generally suspended combustion, it is the central temperature of Henan boiler furnace is desirable to control more than a thousand degrees, but also to ensure there is enough fuel residence time in the boiler, so only in order to completely release heat and smoke reduction. Third, the amount of adjustment of fuel and air flow when the boiler load Henan vary widely, with different pore sizes may replace atomization natural oil is increased or decreased, to reduce dust, while within a certain range, as the wind amount of oil fog mixed with the air will be improved, thus contributing to burn, but if the wind increased volume will increase heat loss, resulting in increased coke dust tail, so users should timely adjust the air supply. Therefore, in order to promote complete combustion of fuel, to reduce the amount of smoke, reduce dust, the purpose of breathing clean air, not only to properly regulate the air distribution to ensure the right amount of air supply, but also to maintain a certain high Henan boiler furnace temperature and combustion time, Further, in the air blowing operation should be adjusted according to the amount of fire nozzle, and a carbon dioxide content of flue gas.
How to prevent the risk of fuel gas-fired residual fired boiler ton? Fuel oil-fired boiler and gas boiler are flammable and explosive material. Boiler room explosion hazard is relatively large, and are generally the source of electricity, natural gas and oil occur. So for the boiler room explosion must start from the circuit with oil and gas management. Three basic factors leading to fuel gas-fired boiler room explosion analysis, summarized the factors that could lead to possible oil or gas boiler room explosion, so that we can avoid boiler explosion happened after work. 1, the release source