distiller grains hot water boiler in cameroon
Maintenance Maintenance of electric boilers electric boilers: General Electric boilers 1--2 years for certain electrical boiler maintenance, contribute to the proper functioning of the electric boiler, regular maintenance for electric boilers but also to protect its normal the basic operation. 1, boiler maintenance, must be cut off and must relief. 2, the burner every two months to be removed from the boiler, carefully remove foreign bodies such as dust and soot. Photocell light-receiving surface wipe once a month, fuel filter should always be kept clean and filtering capabilities; carefully clean the filter in the pump, do not break the seal. Oil-burner not idle, so as not to damage the pump. 3, the water level gauge should always be kept clean, rinse the purge valve is opened, the water level in order to ensure a clear day. 4, pulling the safety valve once a day, to prevent rusting failure. After the work is completed, check whether the tools, materials, complete accessories, such as to prevent left in the furnace space inside. Someone delisted before leaving the job site after acceptance, and finally do the maintenance records, to prepare for subsequent queries.
Tonnage role boiler flue gas temperature probe and the outlet pressure rating of the boiler to determine whether the boiler works will have an impact? And, in the thermal power plant, the outlet pressure of the boiler, which can be divided into grade? In addition, with regard to the boiler, what the relevant questions? These, since the beginning of the article proposes that the following may wish to give a specific answer, so that we can clearly understand, and thus, it can also enhance awareness and understanding of the boiler. 1. boiler, the tonnage will affect it work? Obviously, the answer to this question is not, is no, because between the boiler and the tonnage works, there is no need to contact, so that there is no effect. If, on the principle of the boiler will be summarized, so that the working process is for the fuel combustion, heat transfer, vaporization and heating of the water, and these superheated steam. 2. boiler, which must have three certificates? As well as before, boiler ignition, flue gas temperature probe into why? When the boiler is a must have product certification, product registration certificate annual inspection report and product certification of the three, the lack of a boiler can not be used. As for the use of Flue Gas Temperature probe before firing boiler, the main purpose is to flue gas temperature at the outlet of the furnace is detected, to prevent the boiler reheater tube temperature is too high to be burned out. 3. In the thermal power plant, the outlet pressure of the boiler, which can be divided into grade? Thermal power plant, for the outlet pressure of the boiler, in particular the division level, there is a low, medium, high pressure, high pressure, high pressure subcritical and supercritical six. Specifically, it is not more than 2.45MPa low pressure, medium pressure is 3.83MPa, EHV is 13.7 MPa, and the subcritical and supercritical, is within 16.7 MPa, and the range of 25MPa to 27MPa.
Condensing gas boiler is an energy-saving, environmental protection, security, technology, services, equipment requirements are very high, as seen in the Internet every vendor may feel good, but if the manufacturers site visits will find that there is a big gap so go to the factory site visits is very necessary!
Our preliminary investigation when the other side is very interested in fast boiler, a number of fast-party research and development as well as outstanding patent cases in all industry sectors, we have confidence in each other quickly this brand. After the cooperation, but also the strength and each staff fully aware of the fast boiler of a good attitude, and cooperation in the box, very at ease. --customer feedback