kedai boiler di cheras
1. To determine the heating of the tank, no more open to other pipelines and storage tanks, to avoid heating invalid.
2, the heating process of heating the object to be inspected, after the shutdown temperature in place in a timely manner to avoid unnecessary waste.
3, the production team must not be indiscriminate tune the burner, incorrect combustion of natural gas will make the incomplete combustion or combustion heat loss.
4. To see a gas-fired boiler flue gas temperature gauge regularly and records and found that abnormal temperature boiler to check immediately, whether in normal operation, and report to management.
The gas-fired kedai boiler di cheras will have a series of chemical and physical reactions in the furnace during its operation. In the process of use, it will effectively form its hard and dense scale on the heating surface. This will directly lead to the reduction of heat transfer efficiency and corrosion factors under scale, which will lead to the reduction of boiler water wall furnace heat absorption.
In mid-June, Yingtan City, Jiangxi Province issued a "Yingtan City People's Government Office on the issuance of three-year action plan to win Yingtan City Blue Sky Battle (2018-2020 years)", Yingtan City Market Supervisory Authority proposed by file stringent targets execution, to carry out a three-year coal-fired kedai boiler di cheras special work within the city.
The special rectification, on the basis of thorough investigations within the jurisdiction of coal-fired boilers, the high standard, high-efficiency coal-fired boilers to complete the rectification work to ensure that by the end of 2018 as required successfully completed. 10 out of 21 local stations steam tons / hour and coal-fired boilers and started to build the city and out of the city of 35 tons of steam coal-fired boilers of work; involving the transformation of coal-fired boilers, technical testing organizations should strictly follow the relevant safety technical specifications strict technical clearance, and the overdue completion of the rectification of the enterprise be severely punished according to relevant laws and regulations. Coal-fired boilers by special campaigns, effectively reduce pollutant emissions, improve air quality, help Yingtan beautiful building.
Up to now, the council investigation of coal-fired boiler unit 16, a total of 21 Mopai boiler units, 12 units have been removed, and the rest are in the boiler rectification. Next, the council will further strengthen the regulation of coal-fired boiler follow-up supervision, to ensure that regulation effect.
Boiler house construction, arrangement of what issues need attention 1, hot water kedai boiler di cheras should generally be installed in a separate boiler room built. 2, boiler room should not be directly in many people gathered on both sides of the room (such as public bathrooms, classrooms, auditoriums, shops, restaurants, waiting rooms, etc.) or at the top, bottom, or the immediate neighborhood of the main evacuation port. 3, if the boiler room is connected to the house or building provided in the multilayer room, semi-basement, the first or top layer, then it must meet the following conditions: rated outlet hot water (1) is less than or equal to the temperature of the boiler 95 deg.] C; (2) each boiler shall have over-temperature alarm device; (3) an oil or gas-fired boilers to be installed reliable ignition and flame protection program control device; (4) maintenance and periodic testing of each boiler safety accessories, alarms, chain protection devices to ensure that they are sensitive, accurate, and reliable; (5) semi-basements and basement boiler room require a safety evacuation channel. 4, boiler room should not be located in high-rise buildings, but the conditions required in their basement, semi-basement, first floor or in the top, shall meet the conditions of paragraph 3 of this Article, shall meet the following conditions, and approved by the provincial labor department boiler and pressure vessel safety supervision organization. 1) single boiler rated thermal power is less than or equal 7MW; (2) must be made with oil or gas-fired boilers; (3) over-temperature alarm should each boiler and chain protection; between (4) boiler building structure should have the appropriate proof measures. (5) A boiler can not be connected, (B) and (C) using the plant fire hazard combustible liquid, but if when connected to other production plant, the group which can be installed rated boiler outlet water temperature is lower than 120 deg.] C and the boiler room and the production plant are separated by a firewall. Waste heat boiler is not so limited. 5, fire resistance rating of the boiler room of the building and fire safety requirements should be consistent with "architectural design code for fire protection" and "fire protection design of tall buildings," the relevant provisions. Exterior wall or roof of the boiler room should be at least equivalent to the boiler room area of 10% of the relief area (such as: windows, skylights, weak walls, etc.). Not many people gathered here and the room to make a direct channel, containing flammable, explosive or other connected room dangerous goods. 6, the boiler room should meet the following requirements: (1) arranged in the boiler room of the apparatus should be easy to operate, and service access; (2) the boiler room should have sufficient light and good ventilation, as well as the necessary protection against freezing; (3) should prevent water boiler; (4) in the boiler room the ground should be flat without a step; (5) boiler load bearing beam members and the like, should be a certain distance from the boiler or take other measures to prevent damage to the high temperature. 7, each boiler room should be at least two outlets, are provided on both sides. The total width of the front end of the boiler (the boiler comprises a passage between the inner) does not exceed 12m, and the area does not exceed 200m2 single boiler room and to be open only one outlet. Leading to the boiler room doors should open outwards outdoor, during boiler operation, are not allowed to lock or latch to live. 8, operating locations in the boiler room, as well as pressure gauges, thermometers, flow meters, etc., should have adequate lighting. 9, since the conditions required for the rise in the basement or multi-story building, floor or the top floor when the boiler room is provided, each nominal thermal power of the boiler should be less than or equal to 2.8MW, and the rated water temperature is less than or equal to 120 ℃.