10t h coal gas boiler
2, tightness test
Indoor gas boiler pipes tightness test should be consistent with the following requirements:
① low pressure gas pipe test pressure boiler for planning a pressure not less than 5kPa, under the experimental pressure regulator least 30min, and view all the joint with the blowing agent, no leakage, no pressure gauge pressure drop qualified equipment. When the experimental system stainless steel corrugated hose, plastic composite pipe, oil hose, when the plastic cover brass, IH pressure not less than the experiment, in addition to sealing the respective view point, the end surface of the cladding layer should also whether there is leakage phenomenon View.
② medium pressure gas pipelines boiler pressure test planning more pressure and not less than 0.1Mpa. Under the experimental pressure regulator less than 2h, and view all joints with a blowing agent, no leakage, no pressure drop pressure measurement device qualified.
Fangkuai Boiler has more than 200 after-sales service outlets across the country. Each after-sales service outlet is equipped with a professional 10t h coal boiler technical engineer, providing 24-hour emergency repair services, and has sufficient spare parts and wearing parts all year round, convenient. Customers change in time.
2.1MW horizontal gas-fired thermal oil heater for chemical industryThe dyeing auxiliary is a chemical which enables a processing operation in textile preparation, dyeing, printing or finishing to be carried out more effectively, a 10t h coal boiler provides stable heat source for its production process. Wuxi Kailai Biotechnology Co., Ltd., established in 2001, is an enterprise specializing in developing and manufacturing textile dyeing auxiliaries. The improving performance requirements for textiles lead to a largely increasing demand for dyeing auxiliaries. Kailai Biotechnology decided to obsolete the backward productivity due to the need of enterprise's own development as well as complying with the policy requirements of environmental protection, Kailai Biotechnology planned to order one set of 1.8 million Kcal thermal oil heater and use clean energy natural gas as boiler fuel.As one piece of important equipment of the production line, the thermal oil heater has a direct impact on the quality of dyeing auxiliaries and the benefit of the whole enterprise. After a series comparisons of boiler suppliers, the director of Kailai Biotechnology was deeply impressed by the large-scale, specialized and fine production of ZOZEN.Taking the actual working conditions of Kailai Biotechnology into consideration, the sales manager of ZOZEN provided one set of YQW series gas-fired thermal oil heater (YQW-2100Q) for the company. This series of thermal oil heater is equipped with an advanced low NOx burner, managing to ensure the full combustion of fuel and the NOx emission below 30mg/m3 ; in addition, the thermal oil heater adopts closed cycle heating, which has the characteristics of less thermal losses and remarkable energy saving effect; in conjunction with the energy-efficient equipment installed for the tail flue gas, the thermal efficiency of the heater can reach as high as 95%, the thermal oil heater is not only energy efficient but also safe.
Heating 10t h coal boilers can be used in many areas. The oil and gas boilers produced by ZBG are often used in hospitals, hotels, schools, communities, apartments, office buildings, farms, and greenhouses. In general, the 0.7MW oil and gas boiler produced by ZBG can heat the area of 10,000 square meters. Of course, more factors will be involved in actual use. The improvement of hospital heating system is the focus of many people.