price gas warm water boiler
SZL coal fired chain greate steam boiler for sale
Coal fired boiler design features:
1.By adopting of double wings gas ducts, the fuel gas can go into the front gas tank easily, so the temperature of different front plates can be same. In this way, it can avoid the crackles happening in the plates.
2.Spiral tubes are installed in the drums, which can strengthen the heating transferring efficiency, at the same time, spiral tubes have the ability of dust removal, which can avoid the dust stratification in the tubes.
3.Both of the front and the back arches of the 10t/h series coal fired boiler design adopt mason work of water cool tubes wall structure, which can form permanent arches.
4.Separate adjustable wind chambers. Wind is feed from two sides. It adopts new type crank screw wind adjustment structure, so that the wind adjustment and ventilation cross section proportion is 100%, which can ensure the easy wind adjustment and make it symmetrically.
5.There is push-pull damper dust removal equipment. The damper adopt finish machining cast iron seal structure, thus the secondary combustion distortion and air leaking in the grate is effectively prevented.
Burns Hospital Affiliated Hospital of Shanxi Linfen Linfen Steel is attending a hospital burns burns and other diseases. Hot price warm water boiler is essential hospital equipment heat, hot water output can provide disinfection of medical instruments and ward heating demand. With constantly improving our environmental policy, boiler correspondingly introduced more sophisticated Use. Linfen hospital burns to respond positively to the national environmental policy, decided to introduce an environmentally friendly low nitrogen gas hot water boiler. Taking into account the special circumstances of the hospital, the boiler should also have the use of safe, clean overall characteristics. Based on the above considerations, finalize the Linfen hospital with burns boiler party cooperation fast, fast is provided by one side of a gas condensing pressure hot water boiler (CWNS2.1-95 / 70-Y.Q).
How to choose the right boiler steam solenoid valve tips? Solenoid valve is used to control automation infrastructure element the direction of flow, is actuator; commonly used in industrial machinery and control valves used to control the direction of the medium, so as to achieve the vapor solenoid valve control solenoid valve switch operating principle of the currently used usually over two steam: 1, steam boilers - saturated steam temperature and pressure is relatively stable at temperatures below 250 deg.] C, lower than the working pressure 1.6Mp. It can be widely used in textile, printing, chemicals, plastics, rubber, pharmaceutical, food, building materials, machinery, electronics, surface treatment and research departments as well as bathrooms, dining room, air conditioning and other automatic control system. 2, out of the steam power plant - superheated steam temperature high base pressure changes, temperature up to 400 or more, lower than the working pressure 4.0Mpa. Typically use seal steam solenoid valve broader generic media can be used separately in water, light oil, heavy oil, non-corrosive fluid such as gas and steam. The exhaust system of plant extraction duct draining system and an evaporator, the main medium in the pipeline and a remote two-position automatic adjustment control.
You have to know the energy consumption of boiler problems (control measures exhaust gas temperature of the boiler) 1, operational measures (1) unit load changes, to adjust air flow and pulverizing system operation mode, keeping the excess air ratio most suitable furnace. (2) time to adjust the bottom seal tank inlet valve, suitable to ensure the seal tank water level. (3) changes in coal quality, timely adjustment of combustion, complete combustion and ensure proper furnace flame center. (4) heating surface periodic soot blowing and slag, maintaining heating surface clean. (5) maintaining a suitable gas velocity, the heated area ash reduced tail. (6) Check the class auxiliary burner throttle opening, to ensure there is sufficient oxygen in the combustion. (7) raise the water temperature. 2, boiler routine maintenance and testing (1) combustion optimization and adjustment tests, to determine the economic coal fineness different coal. (2) periodic testing coal fineness, abnormal timely adjustment process. (3) regular air preheater leakage test, and remove air preheater leakage. (4) Always check the furnace to see the fire hole, furnace wall, bottom seal, identify problems and timely closure, reducing boiler leakage. (5) Strengthen routine maintenance soot blowers to closely monitor motor current soot blowers, for soot blowers and often stuck in the barrel bending furnace and other defects timely treatment to ensure soot blowers investment rate above 95%. 3, repair, downtime (1) Check the burner damage, to replace or repair damaged nozzles, the nozzle and the bluff body. (2) heating surface, the flue fouling, slagging cleaning up. (3) adjusting the fuel to determine the secondary air and the opening degree position of the damper flap. (4) Health Check flue gas damper, the damper position adjusting checked. (5) roof sealing, see the fire hole, Manhole, bottom seal tank leakage inspection governance. (6) replacing air preheater wave plate, rinsing, the check processing sector plate, curved plate is deformed, and bearing wear off defects, defect inspection process automatic adjustment mechanism sealing gap. (7) Pulverizing System: Mill off the door, the hot air and the cool air shutter opening degree adjustment. Roller cover and bowl mill liner replacement, the spring biasing force and gap adjustment. Import a fan baffle opening adjustment. (8) the flue expansion joint leakage defect inspection process. (9) soot blowers and related equipment check process. 4, transformation (1) Burner deformation, wear process, replacement, and a bluff body concentrator ceramic sheet, and silicon carbide wear measures. (2) the heated area ash slagging comprehensive inspection process. (3) waterwall, economizer, reheater, superheater tube cutting test monitor segments corrosion and scaling inside the case. (4) boiler, air preheater Leakage leak plugging governance. (5) on the "four leak" taken by plugging repair. (6) backpass wear parts wear welding process and do. (7) heating surface (economizer, superheater, reheater) for transformation, reduce exhaust gas temperature. (8) to do a good job adjusting the air according to test results dynamic field. (9) boiler, the flue joints and other advanced seal plastic material, to reduce leakage.